Blog

 

Plastic Print Pockets

With our Plastic Print Pockets, Sierra Pacific Engineering and Products is addressing an important functionality issue in any industrial enclosure: the need to reliably hold documents in one place. Our Plastic Print Pockets are a no-frills solution that will hold important documents and schematics inside any industrial enclosure, such as NEMA, SwitchGear, etc. With the Sierra Pacific Engineering and Products Print Pockets, there is no fastener needed – the pocket adheres extremely well to a clean painted surface with sturdy double-sided tape (included in purchase). This solution is very reliable and significantly reduces installation time.

The plastic is made of high impact polystyrene and is offered in a standard ANSI-61 Gray color. In addition, Sierra Pacific Engineering and Products offers a customization options. If desired, a molded customer logs fan can be added to a pocket with minimal tooling charges. The Plastic Print Pockets are available in two sizes.
At SPEP, each employee stands behind our products. This is because we are a 100% ESOP company, and every employee has a stake in the business. We take great pride in the quality of each piece of hardware, and work tirelessly in the design and manufacture of our products. Our ISO 9001 certification reflects this commitment to quality and safety, and we are continuously striving to exceed standards.

                                                    P/N 177P

  

                                                        P/N 179P

 

 

Keywords: plastic print pockets

 

Compression Latches

At Sierra Pacific Engineering and Products, compression latches are a huge part of our engineering and production. We have designed and produced a large variety of compression latches that are used in a variety of industries. Because a compression latch, is a relatively simple part that applies duel-sided force to create a seal, we have a multitude of different compression latch configurations, all tailored to your specific needs. We have become experts in developing and manufacturing latches that work in every application and industry. At Sierra Pacific, we pride ourselves on the vast number of different compression latches we offer, such as panel latches, electronic enclosures, large T latches, lift and turn latches, round latches, trigger latches, and tool-activated latches.

Concurrent with each different latch is a diverse set of features that provide the proper level of functionality for the job at hand. We offer exposed and flush mounted latches, key activated latches with a variety of key codes available, and tool-activated latches that reduce tampering or unauthorized access. Please contact us with any questions about the number of features and configurations options available for our compression latches.

At SPEP, each employee stands behind our products. This is because we are a 100% ESOP company, and every employee has a stake in the business. We take great pride in the quality of each piece of hardware, and work tirelessly in the design and manufacture of our products. Our ISO 9001 certification reflects this commitment to quality and safety, and we are continuously striving to exceed standards.

 

                   P/N 5-25CH                                                         P/N 7-12CH-4                                                    P/N  4-14K

  

                     P/N 4-32BK10                                                        P/N 47G-751                                                      P/N 44TC01

        

 

 

Keywords: compression latches, lift and turn latch, pawl latch, T handle latch

 

Unique Stainless Steel Hinge - 1005SS and 1008SS

These two hinges constitute Sierra Pacific Engineering and Products’ unique stamped stainless steel versions of an industry standard hinge. Such a hinge normally is made of die cast zinc and chrome plating, however this version is prone to pitting when exposed to corrosive road salt. Sierra Pacific has greatly improved on the design with its patented stainless steel hinge, which will not pit under such conditions. There are other benefits to the stainless design. For example, cast hinges can fracture upon impact, but stamped hinges will only dent when a major force applied. Please contact us to learn more about the design improvements of the 1005SS and 1008SS hinges. Sierra Pacific Engineering and Products is proud of offer a hinge with numerous benefits and to offer it at a cost comparable to the traditional zinc cast legacy version.

 

                                                 P/N 1005SS                                                                                       P/N 1008SS

Keywords: patented stainless steel hinge, corrosion resistant

 

Explosion Venting Latches

Explosion Venting Latches provide quick venting in case of dangerous internal pressure or explosion. Our Explosion Venting Latch is carefully engineered to maintain a tight seal under normal, non-pressurized conditions. This seal prevents the escape of gasses and heat within a window of normal pressure conditions. Sierra Pacific Engineering and Products abides by industry-standard pressure release ranges.


Sierra Pacific Engineering and Products has also designed these Explosion Venting Latches to be spring/bolt tension adjustable, and the latches are offered in two sizes. The Explosion Venting Latches are ideal for any manufacturing process that involves potentially dangerous gasses, dust particles, heat or chemicals. Industries such as Pharmaceutical, Mineral, Chemical, Food Processing, Textile, and other manufacturers benefit from this essential safety feature, sold by Sierra Pacific Engineering and Products at a competitively low price.

                                                 P/N 174                                                                                            P/N 176

High quality explosion venting latches by Sierra Pacific Engineering and Products

Quality is always of the utmost importance, and we strive to continually create products that meet every expectation. We are ISO 9001 certified, which helps to show our full commitment to top quality manufacturing. We are also a 100% ESOP which means our employees are the sole owners of the company, so everyone has a stake in our success.

Note: According to Factory Mutual Global (FM), the maximum internal pressure latches should release is 50 lbs/ft2. The National Fire Protection Association (NFPA) sets this standard at 30 lbs/ft2 SPEP recommends that the lowest practical settings be used for the most optimized safety settings. 

 

Keywords: safety latch, venting latch, die cast latch, explosion latch, paint booth latch
Google Analytics Alternative