Products / Hinges   (1886 Items)

CT103BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 12.4 LBS, C'SUNK HOLES
CT001
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 0.0 LBS, PLAIN HOLES
 
H2004-01
HINGE BLOCK ASSEMBLY, CHAMFERED EDGES, WITH SS PIN, STEEL HEX NUTS AND FASTENERS, ZINC PLATED
CT002
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 8.0 LBS, PLAIN HOLES
H2241SS-03
SS BUTT HINGE, 4.69 OPEN X 1.57 LONG, .098 THK, C'SUNK HOLES, SS PIN, (3) BRASS BUSHINGS, BRUSHED FINISH
CT540BK
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 12.4 LBS FORWARD AND 20.4 LBS REVERSE
 
W427
10.00 BARREL HINGE WITH STAMPED FEMALE BARREL, .236 OFFSET, WITH GREASE FITTING, STEEL, ZINC PLATED WASHERS, MILL
CT510
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 20.4 LBS FORWARD AND 12.4 LBS REVERSE
CT030
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 20.4 LBS FORWARD 12.4 LBS REVERSE, PLAIN HOLES
CT530BK
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 39.8 LBS FORWARD AND 23.9 LBS REVERSE
CT020BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 15.9 LBS FORWARD 9.7 LBS REVERSE, PLAIN HOLES
CT003BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 12.4 LBS, PLAIN HOLES
CT101BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 0.0 LBS, C'SUNK HOLES
CT102BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 8.0 LBS, C'SUNK HOLES
CT004BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 15.9 LBS, PLAIN HOLES
CT103
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 12.4 LBS, C'SUNK HOLES
CT005BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 20.4 LBS, PLAIN HOLES
 
A62011
ALUM CONT HINGE 2.00 OPEN x 72.00 LONG .060 THK .120 AP - 1.00 KN -
CT030BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 20.4 LBS FORWARD 12.4 LBS REVERSE, PLAIN HOLES
CT020
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 15.9 LBS FORWARD 9.7 LBS REVERSE, PLAIN HOLES
CT070
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 9.7 LBS FORWARD 15.9 LBS REVERSE, PLAIN HOLES
CT560BK
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 23.9 LBS FORWARD AND 39.8 LBS REVERSE
 
H2074
ENCLOSURE HINGE FOR 0.060" [1.5MM] PANEL THICKNESS, 0.77" [19.6MM] DOOR TO FRAME DISTANCE, BLACK POWDER COATED DIE CAST ZINC LEAVES, STEEL NICKEL PLATED PIN
CT040
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 23.9 LBS FORWARD 14.2 LBS REVERSE, PLAIN HOLES
CT190
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 14.2 LBS FORWARD 23.9 LBS REVERSE, C'SUNK HOLES
CT110BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 12.4 LBS FORWARD 7.1 LBS REVERSE, C'SUNK HOLES
CT160BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 7.1 LBS FORWARD 12.4 LBS REVERSE, C'SUNK HOLES
CT001BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 0.0 LBS, PLAIN HOLES
CT105
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 20.4 LBS, C'SUNK HOLES
CT080
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 12.4 LBS FORWARD 20.4 LBS REVERSE, PLAIN HOLES
 
H2060ZN
SPRING LOADED HINGE, CRS, ZINC PLATED
CT070BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 9.7 LBS FORWARD 15.9 LBS REVERSE, PLAIN HOLES
CT106
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 23.9 LBS, C'SUNK HOLES
CT520
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 30.1 LBS FORWARD AND 17.7 LBS REVERSE
CT010
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 12.4 LBS FORWARD 7.1 LBS REVERSE, PLAIN HOLES
CT060
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 7.1 LBS FORWARD 12.4 LBS REVERSE, PLAIN HOLES
CT503
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 15.9 LBS
 
S3158496
CRS CONT HINGE 1.50 OPEN x 96.00 LONG .035 THK .086 CDS SK .250 KN -
CT104
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 15.9 LBS, C'SUNK HOLES
CT002BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 8.0 LBS, PLAIN HOLES
 
H2072
DIE CAST ZINC HINGE, 3.54 OPEN X 2.36 LONG, UNEQUAL LEAVES, M8 THD, BLACK POWDER COAT
 
ML06
2.51 RH LIFT OFF HINGE WITH .093 OFFSET, DIE CAST ZINC, BLACK MATTE POWDER COAT, IN TRAYS
CT010BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 12.4 LBS FORWARD 7.1 LBS REVERSE, PLAIN HOLES
H2247BK
DIE CAST HINGE, 1.97 WIDE X 1.28 LONG, REMOVABLE PLASTIC PIN, MATTE BLACK
 
H1039
STEEL FLAG JOINT, DOUBLE WRAPPED, MILL
CT195
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 17.7 LBS FORWARD 30.1 LBS REVERSE, C'SUNK HOLES
CT004
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 15.9 LBS, PLAIN HOLES
CT120BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 15.9 LBS FORWARD 9.7 LBS REVERSE, C'SUNK HOLES
 
J2083
BUTT HINGE WITH FORMED LEAVES, 3.97 OPEN x 2.75 LONG
CT095
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 17.7 LBS FORWARD 30.1 LBS REVERSE, PLAIN HOLES
CT170
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 9.7 LBS FORWARD 15.9 LBS REVERSE, C'SUNK HOLES
CT006BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, SYMMETRICAL TORQUE 23.9 LBS, PLAIN HOLES
 
H2099SS
SS BUTT HINGE-1.73 OPEN X 2.50 LONG-.093 THK-.142 CDS PIN-STAKED, HOLES-SATIN FINISH
CT101
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 0.0 LBS, C'SUNK HOLES
CT501
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 0.0 LBS
 
1005SS
STAMPED STAINLESS STEEL FLUSH HINGE, ELECTROPOLISHED
CT530
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 39.8 LBS FORWARD AND 23.9 LBS REVERSE
CT540
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, ASYMMETRICAL TORQUE 12.4 LBS FORWARD AND 20.4 LBS REVERSE
 
BH5030
CRS BUTT HINGE-1.06 OPEN x 2.00 LONG-0.035 THK-0.091 CDS PIN-COINED-.25 KN-MILL-SPRING LOADED CLOSED
CT102
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 8.0 LBS, C'SUNK HOLES
CT510BK
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 20.4 LBS FORWARD AND 12.4 LBS REVERSE
CT180BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 12.4 LBS FORWARD 20.4 LBS REVERSE, C'SUNK HOLES
CT003
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 12.4 LBS, PLAIN HOLES
 
M0993
SS HINGE-2.00 OPEN x 3.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(6) C'SUNK FOR #8-ELECTROPOLISHED-
 
W200-01
180MM STL WELD ON HNG, FIXED BRASS PIN & BRASS BUSHING
CT504
CONSTANT TORQUE HINGE, LARGE, DIE CAST ZINC, NATURAL, SYMMETRICAL TORQUE 20.4 LBS
CT040BK
CONSTANT TORQUE HINGE, MEDIUM, DIE CAST ZINC, BLACK, ASYMMETRICAL TORQUE 23.9 LBS FORWARD 14.2 LBS REVERSE, PLAIN HOLES

Products / Hasps & Staples  (45 Items)

 
272SS
Stainless Steel / Tumbled Deburred
Type
Staple Only
 
283S
Steel / Zinc Plated
Type
Staple Only
 
2966BK
Steel / Powder Coat, Black
Type
Swivel
 
2853
Steel / Zinc Plated
Type
Double Hinged
 
295
Steel / Zinc Plated
Type
Miscellaneous
 
2817
Steel / Zinc Plated
Type
Sets
 
M0827
Stainless Steel / Electropolished
Type
Swivel
 
280T-01
Steel / Zinc Plated
Type
Staple Only
 
2965ZN
Steel / Zinc Plated
Type
Swivel
 
2833
Steel / Zinc Plated
Type
Swivel
 
2847PL
Steel / Mill
Type
Miscellaneous
 
2883
Steel / Mill
Type
Staple Only
 
290
Steel / Zinc Plated
Type
Miscellaneous
 
2803
Steel / Zinc Plated
Type
Sets
 
M0627
Stainless Steel / Electropolished
Type
Swivel
 
281U
Steel / Zinc Plated
Type
Staple Only
 
2876
Steel / Zinc Plated
Type
Miscellaneous
 
2830ZN
Steel / Zinc Plated
Type
Hasp Only

Products / Handles   (594 Items)

 
301SS
SS PADLOCKABLE HANDLE, 3.00 THD SHAFT, ELECTROPOLISHED. SS NYLON INSERT LOCK NUT INCLUDED
 
324SS
3/4 DIA. HANDLE ASSEMBLY, 316SS HANDLE & BRACKET, ELECTROPOLISHED
3370LK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, POLISHED CHROME PLATED, 2.00 C-C, 90 DEG CW ROTATION, FRONT MOUNT, WITH NON-THD SQUARE SHAFT AND KEPS NUT
 
308SS-1250
SS LOCKING L-HANDLE, .50" SQ x 3.38" SHANK, KEY CODE 1250, 3 PCS 1/4-20 UNC 2A X .500 AND 3 PCS 1/4-20 UNC 2A X .750 FLAT HEAD SLOTTED MACHINE SCREWS, 316SS, PASSIVATED
337004LK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, POLISHED CHROME PLATED, 2.00 C-C, 360 DEG ROTATION, FRONT MOUNT, WITH NON-THD SHAFT AND KEPS NUT
337001LKBK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, MATTE BLACK POWDER COATED, 2.00 C-C, 90 DEG CCW ROTATION, FRONT MOUNT, WITH NON-THD SQUARE SHAFT AND KEPS NUT
 
3360LK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, POLISHED CHROME PLATED, 2.00 C-C, 90 DEG CW ROTATION, FRONT MOUNT, WITH 3/8-24 THD SHAFT AND KEPS NUT
 
20
4" ZINC CHEST HANDLE WITH HOLES, BLUE ZINC PLATED, BULK
 
320209
L-HANDLE, BLIND MOUNT, 1.813 HOLE CENTER, 90 DEG CC ROTATION, 1.44" THREADED SHAFT, LOCKING (C415A), CHROME PLATED, C8-03 & C5 CAMS, LOCK WASHERS (2), MOUNTING SCREWS (2), JAM NUTS (2)
 
27
MEDIUM RECESSED HNDL,4.25x6.33,SPRG LOAD,ZNC
337001LK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, POLISHED CHROME PLATED, 2.00 C-C, 90 DEG CCW ROTATION, FRONT MOUNT, WITH NON-THD SQUARE SHAFT AND KEPS NUT
 
309-SS-P
SMALL PADLOCKABLE L-HANDLE, 5/16 SQ X 3.25 SHAFT, 304SS, POLISHED
 
300B
STEEL PADLOCKABLE L-HANDLE, BRUSHED ZINC PLATED FINISH
3370LKBK
LARGE L-HANDLE, LOCKING, CH751, PADLOCKING, MATTE BLACK POWDER COATED, 2.00 C-C, 90 DEG CW ROTATION, FRONT MOUNT, WITH NON-THD SQUARE SHAFT AND KEPS NUT
 
321-S-ZN
LARGE PADLOCKABLE L-HANDLE WITH 1/2 SHAFT, STEEL, BLUE ZINC PLATED
 
35BK-01
L-HANDLE, NON LOCKING, MATTE BLACK POWDER COATED, 1.50" C-C, 90 DEG CW ROTATION, BLIND MOUNT, 1.25" SHAFT, 3/8-24 THD, KEPS NUT, AND MOUNTING SCREWS, C21 SHORT CAM, .63" - .75" GRIP

Products / Latches   (2516 Items)

 
6-12CH
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .472 TO .669
 
6-12CHLK
SLAM LATCH, FLUSH MOUNT, LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .472 TO .669
 
2-13BK02
PLASTIC PUSH BUTTON LATCH, LOCKING, CH751, PULL TAB PERPENDICULAR TO BOLT, WITH O-RINGS, WITH SS PASSIVATED STRIKE
 
1183ZN
LH BULLET NOSE BOLT LATCH, STEEL, ZINC PLATED
 
6-10CH
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .079 TO .276
 
176
LARGE EXPLOSION VENTING LATCH, ZINC PLATED
 
1192
SLIDE BAR LATCH, NYLON BOLT,BLK PNT'D
 
6-13SST
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .669 TO .866
 
44G
TRIGGER LATCH WITH SHORT ARM, NON-LOCKING, GRAY, .04 TO .95 GRIP, WITH METAL PANEL MOUNTING KIT
9-22BK01
SEALED COMPRESSION LATCH, ROUNDED LEVER, LARGE, LOCKING, CH751, .04 - .43 THK DOOR, .04 - .55 GRIP, BLACK POWDER COATED, WITH GASKET
 
2095
LARGE TWIST LATCH W/ SS SLIDE, SPRING LOADED, NO KEEPER, ZINC PLATED, BULK
 
6-12SSTLK
SLAM LATCH, FLUSH MOUNT, LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .472 TO .669
173SST-CH751
316SS BOLT LATCH WITH KEEPER, LOCKING, CH751, BRUSHED FINISH
 
6-10CHLK
SLAM LATCH, FLUSH MOUNT, LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .079TO .276
 
6-13CHLK
SLAM LATCH, FLUSH MOUNT, LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .669 TO .866
496SS-L
MULTI POINT PADLOCKABLE FOLDING T-HANDLE, FIXED ROLLER CAM, KEY LOCKING, CH501, SS POLISHED PAN, CHROME PLATED T, LEFT HAND
 
41-00
SLOTTED ARROW PLUG QUARTER TURN LATCH, CHROME PLATED DIE CAST ZINC, UL FACE SEAL & INTERNAL O-RINGS, BODY NUT, NO CAM
 
730-01
SAFETY LOCK KIT WITH 33.250" LONG CONNECTING RODS, BULK
 
6-11SST
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .276 TO .472
 
6-11SSTLK
SLAM LATCH, FLUSH MOUNT, LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .276 TO .472
 
405H
SMALL PADDLE HANDLE, LOCKING, SP-1, PRECOAT, HOLES, 30 DEG STANDARD BOLT
 
6-11CH
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE ..276 TO .472
 
6-13CH
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .669 TO .866
 
6-10SSTLK
SLAM LATCH, FLUSH MOUNT, LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .079 TO .276
 
123SS
STAINLESS STEEL SLAM LATCH, SMALL, BRUSHED FINISH, NO KEEPER
 
5-20SS-4
SMALL LIFT & TURN LATCH, SS, PASSIVATED, GRIP IN .47 - .87, OUT .87 - 1.25
 
2178SS
OVER CENTER PADLOCKING LATCH, SS, PASSIVATED, NO STRIKE
 
6-13SSTLK
SLAM LATCH, FLUSH MOUNT, LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .669 TO .866
 
173SST
316SS BOLT LATCH WITH KEEPER, NON-LOCKING, BRUSHED FINISH
 
220-300SS
RUBBER T-HANDLE DRAW LATCH, LARGE, SS LONG KEEPER, PASSIVATED
 
6-11CHLK
SLAM LATCH, FLUSH MOUNT, LOCKING, DIE CAST ZINC, CHROME PLATED WITH STRIKE, PANEL THICKNESS RANGE .276 TO .472
 
6-12SST
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .472 TO .669
 
50L-751LK
LARGE SWINGHANDLE FOR CAM ASSEMBLY, KEY LOCKING, CH751, 20MM DIE CAST ZINC HOUSING, DIE CAST ZINC HANDLE, BLACK POWDER COATED, PADLOCKABLE
 
D395BK
PLASTIC SNAP IN MAGNETIC CATCH, MEDIUM, BLACK, FOR FRAME THK. .02 TO .08
 
6-10SST
SLAM LATCH, FLUSH MOUNT, NON-LOCKING, 316SS, HAND POLISHED WITH STRIKE, PANEL THICKNESS RANGE .079 TO .276

Products / Nema JIC   (374 Items)

 
T124-10
OIL TIGHT SEAL, 2" CONDUIT HOLES, STEEL, TEXTURE GREY POWDER COATED
 
2185SS
JIC QUICK RELEASE CLAMP, 304SS, TUMBLED BRIGHT, WITH 4 WASHERS
 
177P
SMALL PRINT POCKET, GRAY, INDIVIDUALLY POLYBAGGED (SEALED), LOGO W/TAPE
 
180
NEMA PADLOCK HASP, CRS, TUMBLED
J2130
ENCLOSURE HINGE KIT, ZAMAK 5 BOX LEAF CLEAR ZINC PLATED, WITH 304SS, PASSIVATED COMPONENTS
 
GE1RH
RT HAND ENCLOSURE LOCK KEYED CAT60
 
15ZN
STEEL NEMA LEVER CLAMP ASSEMBLY, ZINC PLATED
 
J2088SS
QUICK RELEASE HINGE W/MOUNTING HDW, SS, 8-32 SCREWS, NO C-CLIP REQUIRED
 
184
JIC LIFT-OFF HINGE, CDS, MILL
 
J2014
SEALING RING CLEAR ANODIZED, ASSEMBLED, POLYBAGGED
1462ZN
STEEL DOOR STOP, ZINC PLATED
 
701-01
CENTER ROLLER CAM WITH COLLAR, ADJUSTABLE, ZINC PLATED
 
185
SMALL NEMA DOOR CLAMP BRACKET, CRS, TUMBLED, LIGHTLY OILED, 1/4-20 THD
 
H2064ZN
HINGE WITH REMOVABLE PIN AND C-CLIP, STEEL, ZINC PLATED
 
710SS
ADJUSTABLE ROD GUIDE KIT, SS, PASSIVATED
 
14SST
316SS NEMA CLIP KIT WITH 1/4-20 SCREW, ASSEMBLED
 
765
TUBULAR ROD, HOLE CENTER @ 33.83, CLEAR ZINC PLATED
 
700
FIXED CAM, .60 OFFSET, CLEAR ZN, FOR 3PT LATCH KIT

Products / Pulls   (205 Items)

 
J3006
304SS ROUND FLUSH PULL, COPPER PLATED STUDS
 
951
3.00" WIRE PULL SOLID BRASS,POL & LACQ
 
989BK
PLASTIC HANDLE, 122MM CENTER TO CENTER, NYLON 6/66, BLACK
 
933
WIRE HANDLE, 90 DEG ROTATION, 4.00" C-C
 
983
7.00 PULL, STEEL, POLISHED CHROME PLATED, NO LOGO
 
905CH
3.78" WIRE PULL, 8-32 THD, STEEL, CHROME PLATED
 
960
ALUM PULL, BLIND MOUNT, 4.00 C-C, BRUSHED FINISH
 
9914
ALUMINUM PULL, 1.12 & 2.00 HOLE CENTERS, 8-32 THD HOLES, CLEAR MATTE ANODIZED
 
94-01
FLUSH PULL, LARGE, 120MM LONG X 58MM WIDE, BEIGE PLASTIC
 
967BK
ALUMINUM PULL, 250MM CENTER TO CENTER X 70MM HEIGHT, BLACK POWDER COATED
 
2001900
FEMALE SHOWER DOOR HANDLE,MILL
 
91-21BK
PULL, FLUSH, LRG, SNAP-IN PLASTIC, BLACK, FOR PANEL THICKNESS .070 - .085, UL94-HB
 
J3126
STAMPED HANDLE, .056 THK, GALVANIZED STEEL
91-02
LARGE BLACK PLASTIC CONCEALED PULL, FLUSH MOUNTING, ALUMINUM HANDLE, BLACK POWDER COATED
92-01
LOW PROFILE TWO PIECE FLUSH POCKET PULL, PLASTIC, BLACK, FOR PANEL THICKNESS .040 - .070, TWO STEEL ZINC PLATED SCREWS
 
976
CHROME PLATED 4" C-C HANDLE, ZINC ALLOY
 
987SS
PULL, 13.38" LONG, SS, POLISHED, PASSIVATED
 
920
FORMED STEEL GRAB HANDLE, NO HOLES, BULK

Products / Door Holders  (66 Items)

 
620BK-03
Aluminum / Black
6.00 ALUM TWO PC HITCH, SS RIVETS, BLACK E-COATED
 
619
Rubber
BLACK RUBBER SOCKET AND STEEL ZINC PLATED CUP FOR MALE SHAFT
 
621-07
Aluminum
10.00 ALUM THREE PC BALL AND SOCKET DOOR HOLDBACK, SS RIVETS, BLACK E-COATED
 
602
Steel
Type
Wire Door Holders
 
630W
Plastic / White
Type
Plastic Door Holders
 
60202
Steel
Type
Wire Door Holders
 
621P-01
Aluminum
4.50 ALUM THREE PC BALL AND SOCKET DOOR HOLDBACK, SS RIVETS, POLISHED
 
622
Aluminum
2.00 ALUM TWO PC HITCH, SPRING LOADED, SS RIVETS, POLISHED, WITH KEEPER FROM P/N 620
 
600
Plastic / White
Type
Plunger & Socket
 
601
Steel / Electropolished
Type
Wire Door Holders
 
626G
Plastic
Type
Plastic Door Holders
 
611SS
Stainless Steel
3.5" MALE SS SHFT 30DEG BEND, POLISHED
 
606SS
Stainless Steel
3.5" MALE SS SHAFT POLISHED
 
60201
Steel / Zinc Plated
Type
Wire Door Holders
 
625
Type
Miscellaneous
 
615ZN
Steel
2.63" MALE STEEL SHAFT, ZINC PLATED
 
P1016
Plastic
Type
Miscellaneous
639
Rubber / Black
Type
Plunger & Socket

Products / Tie Downs  (50 Items)

 
863ZN
Steel / Zinc Plated
Type
Surface Mount
 
858
Steel / Zinc Plated
Type
Surface Mount
 
880SS-02
Stainless Steel / Tumbled Deburred
Type
Loops & Rope Rings
 
866
Steel / Mill
Type
Forged Lashing Ring
 
860SS
Stainless Steel / Electropolished
Type
Loops & Rope Rings
 
858-05
Steel / Zinc Plated
Type
Surface Mount
 
859
Steel / Zinc Plated
Type
Loops & Rope Rings
 
9903ZN
Steel / Zinc Plated
Type
Loops & Rope Rings
 
868
Steel / Mill
Type
Forged Lashing Ring
 
D200
Steel / Nickel Plated
Type
Loops & Rope Rings
 
D388
Steel / Mill
Type
Chain Retainer
 
857
Steel / Zinc Plated
Type
Recessed
 
807
Steel / Mill
Type
Loops & Rope Rings
 
856
Steel / Zinc Plated
Type
Recessed
 
885-01
Aluminum / Polished, Hand
Type
Loops & Rope Rings
 
895
Steel / Zinc Plated
Type
Recessed
 
891SS
Stainless Steel / Mill
Type
Recessed
 
898
Steel / Zinc Plated
Type
Recessed

Products / Locks   (413 Items)

K05ICP50
PUSH AND TURN KNOB CAM LOCK, CHROME PLATED
 
KH20
3/4 DIA SPRING CLIP, NICKEL PLT
K04OCH50
CHROME PLATED CAMLOCK, PADLOCKING, STEEL ZINC CAM
 
KC006
1.55" LONG CAM, NICKEL PLATED, HOOK.
 
K10OCP---001
CP LATCH-7/8-NO CAM-ROTATION A, SCREW ON-HEXNUT-BULK-
 
K17LBK01
THUMB TURN CAMLOCK, 25/32, WITH CAM, ROT A, BODY NUT, WASHER, SCREW
 
5901
BRASS PLATED PADLOCKABLE CYLINDER W\OFFSET CAM TRIM RING,NUT,SCREW, AND NYLON INSERT LOCK NUT
K03PCP05
BRASS TUBULAR CAMLOCK, .685" BODY LENGTH, 2-KEYS, 90 DEG ROTATION, NO CAM, SCREW ON BODY NUT, CHROME PLATED
 
K09ICP---001
CAMLOCK,5/8,CP COIN,ROTA,SCRW,NO CAM
 
KC010
1.625" LONG CAM, YELLOW ZINC PLATED, 0.655 OFFSET.
 
KC115
1.5" LONG CAM, ZINC PLATING, STRAIGHT.
 
K220
CAM LOCK DUST CVR CHROME PLATED
 
KH32
CAMLOCK 4-PRONG SPUR WASHER .0350 THK, 1-5/16"OD, BULK
 
K40ICP01
BLACK CAMLOCK-5/8-KC207-SCREW-ON CAM-HEXNUT MOUNT-BULK W/CAM-BELCORE STYLE
 
K04ISS---001
SS CAMLOCK-5/8-2 CH751-NO CAM-90 DEG SCRW ON-HEXNUT---BULK-CMPNTS ATTACHED
K03PCP09
DIE CAST CAMLOCK, SS CAPPED-CYLINDER, .677" BODY LENGTH, 2-KEYS, 90 DEG CW ROTATION, STRAIGHT CAM, BODY NUT AND DUST SHUTTER, CHROME PLATED
 
KH34SS
CAM LOCK FINGER PULL, STAINLESS STEEL, TUMBLE DEBURRED
K04JSS---001
SS CAM LOCK-SS DUST SHUTTER-5/8- O-RING ON PLUG-2 CH751-NO CAM-90DEG SCRW ON-HEXNUT-K04G GASKET-

Products / Miscellaneous   (155 Items)

 
1136
RV SCREEN DOOR LATCH FOR LEFT HAND OR RIGHT HAND USE, BLACK, ABS MATERIAL, POLYCARBONATE HANDLE, WITH KEEPER AND STRIKER
 
1135
RV SCREEN DOOR LATCH FOR LEFT HAND OR RIGHT HAND USE, BLACK, ABS MATERIAL, POLYCARBONATE HANDLE
 
1310
1.00 DIA BUMPER, 1.75 HGT, W/ WASHER, BLK SBR
 
2D
YELLOW ZINC PLATED SASH LOCK WITH KEEPER
 
1131K
KEEPER FOR SCREEN DOOR LATCH, NYLON 66 UV, BLACK
 
P1052W
PLASTIC LICENSE PLATE HOLDER, STEP, WHITE
 
1135K
KEEPER FOR UNIVERSAL DOOR LATCH, BLACK, ABS
 
9901ZN
FOOTMAN LOOP, 2.13" C - C, ZINC PLATED
 
1170
LEFT HAND SCREEN DOOR LATCH, BLACK ABS HOUSING, POLYCARBONATE HANDLE
 
9902SS
FOOTMAN LOOP, 2.24" C - C, 304SS, PASSIVATED
 
1132RH
RIGHT HAND SCREEN DOOR LATCH WITH STRIKER AND KEEPER, BLACK NYLON 66 UV
 
1311
2.50 DIA BUMPER, BLACK SBR
 
875BK
FOLDING STEP, SMALL, STEEL, BLACK E-COATED
 
P1051BK
PLASTIC LICENSE PLATE HOLDER, FLAT, BLACK
 
1131S
STRIKER FOR SCREEN DOOR LATCH, NYLON 66 UV, BLACK
TM-81-2R
SS LID STAY, 277MM LONG, RIGHT HAND, POLISHED
 
E103
EYEBOLT, PLAIN PATTERN, STEEL, 0.25" SHANK, 1.00" LONG
 
1131RH
RIGHT HAND SCREEN DOOR LATCH, BLACK, NYLON 66 UV, POLYCARBONATE HANDLE
 
E203SST
EYEBOLT, SHOULDER PATTERN, 316SS, 1/4-20 THREAD, 1.00" LONG, ELECTRO-POLISHED
J2036P-02
PLASTIC SWITCH CUP, 1 KNOCK OUT, BLACK
 
P1020
PLASTIC VENT, NATURAL COLOR
 
333
SWIVEL EYE SNAP, NICKEL PLATED
 
874CH
FOLDING STEP, LARGE, DIE CAST ZINC, TEXTURED CHROME PLATED
 
1135S
STRIKER FOR UNIVERSAL DOOR LATCH, BLACK, ABS
 
J2005
RH LID STAY,BRASS PLATED & LACQUERED
 
1132LH
LEFT HAND SCREEN DOOR LATCH WITH STRIKER AND KEEPER, BLACK NYLON 66 UV
 
9903ZN
FOOTMAN LOOP, 2.63" C- C, ZINC PLATED
 
J2004
LEFT HAND TABLE BRACE, ZINC PLATED
 
1131LH
LEFT HAND SCREEN DOOR LATCH, BLACK, NYLON 66 UV, POLYCARBONATE HANDLE
Refine Search
Google Analytics Alternative