Butt hinges are the backbone of any door and they are in constant use, so durability and longevity of these parts are essential. A butt hinge is designed to be inset (mortised) into both the doorframe and door. This type of hinge is usually made with a small number of overlapping knuckles (three or four), compared to a continuous hinge.

Stainless steel industrial butt hinges are made of a thicker material than the standard hinge, which helps create an extremely strong and robust piece of hardware that will stand up to any harsh industrial environment.

Whether you need butt hinges for corrosive marine environments, spray booths, trucks/trailers, or any other application, SPEP can fulfill your requirements for a hinge made of the highest-quality material, using the best design, for the lowest price on the market.

In addition to our wide selection of stainless steel industrial butt hinges, we also offer hinges made of aluminum, steel, and plastic, in several finishes, and with or without holes.

To make our butt hinges, we employ a team of qualified engineers and professional testers, who are intimately involved in every aspect of the manufacturing process.

If none of the products in our catalog meets your exact specifications, SPEP also offers custom designed and/or modified industrial butt hinges using high-tech design and manufacturing processes, including 3-D CAD, run on the SolidWorks platform, and finite element analysis (FEA) capability. Our fused deposition modeling (FDM) machines allow us to create a 3-dimensional ABS plastic prototype of a part within hours, which we make available to you for use in your own design process.

Our quality department runs on Oracle’s Quality Module and SPEP is ISO 9001 certified for industrial quality management.

Sierra Pacific Engineering and Products is 100% ESOP-owned, which motivates each employee to personally ensure customer satisfaction.

For any more questions you may have, you can ask us here.
 

 

Filter Products

Material
316 Stainless Steel
Aluminum
Brass
Die Cast Zinc
Plastic
Stainless Steel
Steel
Open Width
2.00 and Below
2.01 - 3.00
3.01 - 4.00
4.01 and Above
Holes
Holes
No Holes
Finish
Black
Brass Plated
Electropolished
Gray Painted
Lacquered
Mill
Zinc Plated
Pin Retention
Coined
Spun Ends
Staked
H2241SS-03
Stainless Steel
SS BUTT HINGE, 1.57 OPEN X 4.69 LONG, .098 THK, C'SUNK HOLES, SS PIN, (3) BRASS BUSHINGS, BRUSHED FINISH
 
H2099SS

SS BUTT HINGE-1.73 OPEN X 2.50 LONG-.093 THK-.142 CDS PIN-STAKED, HOLES-SATIN FINISH
 
BH5030
Steel / Mill
CRS BUTT HINGE-1.06 OPEN x 2.00 LONG-0.035 THK-0.091 CDS PIN-COINED-.25 KN-MILL-SPRING LOADED CLOSED
 
H2072
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 3.54 OPEN X 2.36 LONG, UNEQUAL LEAVES, M8 THD, BLACK POWDER COAT
 
M1003
Stainless Steel / Mill
SS HINGE 2.75 OPEN x 2.000 LONG .060 THK .120 SSP SK .500 KN CS EP #8 SCRW
 
7S2525
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 2.500 LONG .074 THK .187 CDS SP UNEQ KN -
 
9A3035
Aluminum / Mill
ALUM BUTT HINGE 3.00 OPEN x 3.500 LONG .091 THK .187 AP SP UNEQ KN -
 
6SST2020
316 Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.000 LONG .060 THK .125 SS SK KN - 316 SS
 
BH5024ZN01
Steel / Zinc Plated
CRS BUTT HINGE-1.50 OPEN X 1.75 LONG-.035 THK-.091 SS PIN-COINED-.250 KNUCKLES-.157 DIA HOLES-ZINC PLATED-SPRING LOADED OPEN
 
8S2030
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 3.000 LONG .085 THK .195 CDS SK .500 KN -
H2233
Die Cast Zinc
DIE CAST BUTT HINGE, 1.732 OPEN X 1.929 OPEN, M4-0.7 THD SCREWS, PLASTIC SCREW COVERS, BLACK
 
H3503P-01
Plastic / Black
PLASTIC ENCLOSURE HINGE, 1.97 OPEN X 1.97 LONG, .24 THK, .236 SS PIN, STEEL ZINC PLATED M6 STUDS, BLACK
 
13S3939
Steel / Mill
CRS BUTT HINGE-3.94 OPEN x 3.94-.137 THK-.315 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
BH5030SS01
Stainless Steel / Mill
SS SPRING LOADED CLOSED HINGE-1.25 OPEN x 2.00 LONG-.035 THK-.091 SSP-KNURLED-.250 KN-W/ HOLES-DEGREASED AND BURNISHED-
 
BH0065
Steel / Mill
CRS BUTT HINGE 1.06 OPEN x 1.250 LONG .035 THK .091 CDS SK .250 KN -
 
BH0085
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 1.500 LONG .035 THK .091 CDS SK .250 KN -
 
12S3030
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 3.000 LONG .120 THK .250 CDS SP UNEQ KN -
H2081CH
Stainless Steel
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, M6 THREADED STUDS, SS PIN, BRIGHT CHROME PLATED
 
H3521P
Plastic / Black
PLASTIC BUTT HINGE, 2.32 OPEN X 1.89 LONG, .315 THK, .023 SS PIN, C'SUNK (4) HOLES, M4 SCREWS, BLACK
 
H3523P
Plastic / Black
PLASTIC BUTT HINGE, 2.99 OPEN X 1.89 LONG, .355 THK, .024 SS PIN, C'SUNK (4) HOLES, M6 SCREWS, BLACK
 
H3520P
Plastic / Black
PLASTIC BUTT HINGE, 2.32 OPEN X 1.89 LONG, .355 THK, .024 SS PIN, C'SUNK (4) HOLES, M6 SCREWS, BLACK
 
M1068
Stainless Steel / Mill
SS HAIRPIN CLIP FOR M1067 HINGE
H2279BK-01
Die Cast Zinc
DIE CAST BUTT HINGE, 2.48 OPEN X 1.97 LONG, 0.24 STEEL NICKEL PLATED KNURLED PIN, C'SUNK, BLACK POWDER COATED
 
M1001
Stainless Steel / Mill
SS HINGE-6.00 OPEN x 1.500 LONG-.060 THK-.120 SSP-COINED-.375 KNUCKLES-(6) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
9S303002
Steel / Zinc Plated
CRS BUTT HINGE-3.00 OPEN x 3.000 LONG-.098 THK-.250 SSP-SP-.500 KN--ZP-
 
H3522P
Plastic / Black
PLASTIC BUTT HINGE, 2.32 OPEN X 1.89 LONG, .354 THK, .024 SS PIN, C'SUNK (4) HOLES, M6 SCREWS, BLACK
H2271SS-01
Stainless Steel
SS BUTT HINGE, .059 THK, 1.38 OPEN X 1.50 LONG, .236 SS PIN, C'SUNK HOLES, BRUSHED
 
8S1520SSP
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 2.000 LONG .085 THK .195 CDS SK .500 KN -
 
25S5060
Steel / Mill
CRS BUTT HINGE 5.00 OPEN x 6.000 LONG .250 THK .625 CDS - UNEQ KN -
 
BH0060
Steel / Mill
CRS BUTT HINGE-1.06 OPEN x 1.000 LONG-.035 THK-.091 CDS PIN-STAKED TWO PLACES-.250 KN-MILL FINISH-
 
10SS2025
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.500 LONG .105 THK .187 SSP SP UNEQ KN -
 
H3511P-04
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M5 THD HOLES AND M6 THD INSERTS BLIND MOUNTING, BLACK
 
6A2020
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.000 LONG .064 THK .125 AP SP UNEQ KN -
 
H2269BK
Die Cast Zinc
DIE CAST BUTT HINGE, 4.72 OPEN X 2.36 LONG, .315" DIA STEEL PIN, C'SUNK, HOLES, BLACK POWDER COATED
 
M0997
Stainless Steel / Mill
SS BUTT HINGE-1.31 OPEN x 1.50 LONG-.060 THK-.120 SS PIN-COINED-.375 KNUCKLES-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
BH5034SS01
Stainless Steel / Mill
SS BUTT HINGE-1.00 OPEN X 2.00 LONG-.0394 THK-.090 SS PIN-COINED-.250 KNUCKLES-.145 DIA HOLES-MILL-SPRING LOADED CLOSED
H2279BK
Die Cast Zinc
DIE CAST BUTT HINGE, 2.48 OPEN X 1.97 LONG, 0.24 STEEL NICKEL PLATED KNURLED PIN, M6 THD STUDS, BLACK POWDER COATED
 
BH0055
Steel / Mill
CRS BUTT HINGE .750 OPEN x 1.000 LONG .035 THK .091 CDS SK .250 KN -
 
18S5060
Steel / Mill
CRS BUTT HINGE 5.00 OPEN x 6.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
BH5087
Steel / Mill
CRS BUTT HINGE 3.25 OPEN x 1.562 LONG .050 THK .115 CDS CN .312 KN RD - SPRG OPN
 
H3513P
Plastic / Black
PLASTIC BUTT HINGE, 2.58 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, C'SUNK (2) HOLES, M6 SCREWS,BLACK
 
9S1919
Steel / Mill
CRS BUTT HINGE-1.97 OPEN x 1.97 LONG-.098 THK-.196 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
25S6060
Steel / Mill
CRS BUTT HINGE 6.00 OPEN x 6.000 LONG .250 THK .625 CDS - UNEQ KN -
 
H2099BK
Steel / Black
CRS BUTT HINGE-1.73 OPEN X 2.50 LONG-.093 THK-.142 CDS PIN-STAKED, HOLES-BLACK SEMI GLOSS POWDER COAT
H2259SS-01
Stainless Steel
CAST SS BUTT HINGE, .157 THK, 2.00 OPEN X 1.56 LONG, 0.197 DIA SS PIN, KNURLED, C'SUNK HOLES, MILL
H2271SS-02
Stainless Steel
SS BUTT HINGE, .059 THK, 1.87 OPEN X 1.50 LONG, .236 SS PIN, C'SUNK HOLES, UNEQUAL LEAVES, BRUSHED
 
H3516P
Plastic / Black
PLASTIC BUTT HINGE, 3.54 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, C'SUNK (2) HOLES, M6 SCREWS, BLACK
 
H3507P
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, M5 THD, HOLES, BLACK
 
H2073-02
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 1.50 OPEN X 2.00 LONG, 1/4-20 THD, CDS PIN, SEMI-GLOSS BLACK POWDER COATED
 
12S40401
Steel / Mill
CRS BUTT HINGE 4.00 OPEN x 4.000 LONG .120 THK .275 CDS SP KN - SWAGE EA
 
18SST4040
316 Stainless Steel / Mill
SS BUTT HINGE 4.00 OPEN x 4.000 LONG .180 THK .375 SSP SP KN - 316 SS
 
H3511P-02
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M6 THD, INSERTS AND STUDS, BLACK
 
9A3030
Aluminum / Mill
ALUM BUTT HINGE-3.00 OPEN x 3.000 LONG-.091 THK-.187 AP-SP-.500 KNUCKLES-MILL-
 
BH5022SS01
Stainless Steel / Mill
SS BUTT HINGE-.75 OPEN X 1.25 LONG-.025 THK-.066 SS PIN-COINED-.250 KNUCKLES-.130 DIA HOLES-MILL-SPRING LOADED OPEN
 
H3517P
Plastic / Black
PLASTIC BUTT HINGE, 3.19 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, C'SUNK (2) HOLES, M6 SCREWS
 
BH5022SS
Stainless Steel / Mill
SS BUTT HINGE-.75 OPEN X 1.250 LONG-.025 THK-.066 SS PIN-COINED-.250 KNUCKLES-MILL-SPRING OPEN
H2282BK-01
Die Cast Zinc
DIE CAST BUTT HINGE, 2.99 OPEN X 1.97 LONG, 180 DEG ROTATION, 0.236 STEEL PIN, 6.10MM X 13.50MM C'SUNK HOLES, BLACK POWDER COATED
 
12S4040
Steel / Mill
CRS BUTT HINGE-4.00 OPEN x 4.000 LONG-.120 THK-.275 CDS-SP-UNEQ KN----
H2081CH-02
Stainless Steel
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, (4) CSUNK HOLES, SS PIN, BRIGHT CHROME PLATED
 
H3515P
Plastic / Black
PLASTIC BUTT HINGE, 2.83 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, UNEQUAL LEAVES, C'SUNK (2) HOLES, M6 SCREWS, BLACK
 
12SST4040
316 Stainless Steel / Mill
SS BUTT HINGE 4.00 OPEN x 4.000 LONG .120 THK .250 SSP SP KN - 316 SS
 
H3506P-01
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, M4 THD, STUDS, BLACK
 
BH5015SS
Stainless Steel / Mill
SS BUTT HINGE .750 OPEN x 1.250 LONG .025 THK .066 SSP - .25 KN - SPRG CL
 
H1100BK
Plastic / Black
PLASTIC HINGE, BLACK, SS PIN, WITH SCREW CAPS
 
H2073
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 2.00 OPEN X 2.00 LONG, M6 THD, BLACK POWDER COAT
 
12SS2829
Stainless Steel / Mill
SS BUTT HINGE-2.95 OPEN x 2.95 LONG-.120 THK-.275 SS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
12SS3435
Stainless Steel / Mill
SS BUTT HINGE-3.47 OPEN x 3.54 LONG-.120 THK-.315 SS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
7S303003
Steel / Zinc Plated
CRS BUTT HINGE-3.00 OPEN x 3.00 LONG-0.074 THK-0.187 CDS PIN-LIGHT OPPOSITE STAKE-0.50 KN-0.250 DIA HOLES-ZINC & CLEAR CHROMATE FINISH-
 
M7203
Stainless Steel / Mill
SS HINGE 1.19 OPEN x 3.440 LONG .060 THK .120 SSP SK UNQL KN CS EP #8 SCRW
 
BH5089SS
Stainless Steel / Mill
SS BUTT HINGE-1.50 OPEN x 2.50 LONG-0.060 THK-0.120 SS PIN-COINED-0.50 KN-MILL-SPRING LOADED OPEN
 
H3519P
Plastic / Black
PLASTIC BUTT HINGE, 2.01 OPEN X 1.89 LONG, .355 THK, .024 SS PIN, C'SUNK (4) HOLES, UNEQUAL LEAVES, M6 SCREWS, BLACK
 
M0992
Stainless Steel / Mill
SS BUTT HINGE-2.00 OPEN x 2.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
H2257BK-01
Die Cast Zinc
DIE CAST BUTT HINGE, 2.99 OPEN X 1.97 LONG, 180 DEG ROTATION, 0.236 STEEL PIN, M6 THD STUDS, BLACK POWDER COATED
 
9SS2530
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 3.000 LONG .090 THK .187 SSP SP UNEQ KN -
 
6S2525BP
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 2.500 LONG .060 THK .125 BP SK .500 KN -
 
H3502P
Plastic / Black
PLASTIC BUTT HINGE, 1.58 OPEN X 1.58 LONG, .20 THK, 0.157 SS PIN, (4) C'SUNK HOLES FOR M5 SCREWS, BLACK
 
6S1520BP
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 2.000 LONG .060 THK .125 BP SK UNEQ KN
 
H2266SS
Stainless Steel
SS BUT HINGE, 1.50 OPEN X 1.50 LONG, .059 THK, .236 SS PIN, (4) C'SUNK HOLES, BRUSHED, REVERSE ASSEMBLED, ONE LEAF FORMED
 
8A2525
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 2.500 LONG .081 THK .081 AP SP UNEQ KN -
 
6SS1520
Stainless Steel / Mill
SS BUTT HINGE 1.50 OPEN x 2.000 LONG .060 THK .125 SSP SK .500 KN -
 
BH5087ZN
Steel / Zinc Plated
CRS BUTT HINGE-3.25 OPEN x 1.562 LONG-.050 THK-.115 CDS-CN-.312 KNUCKLES-RD-BRIGHT CLEAR ZINC PLATED--SPRING OPEN
 
BH5025ZN01
Steel / Zinc Plated
CRS BUTT HINGE-1.50 OPEN X 3.50 LONG-.0394 THK-.090 SS PIN-COINED-.50 KNUCKLES-.157 DIA HOLES-ZINC PLATED-SPRING LOADED CLOSED
H2259SS
Stainless Steel
CAST SS BUTT HINGE, .197 THK, 2.79 OPEN X 2.36 LONG, .244 DIA SS PIN, KNURLED, C'SUNK HOLES, MILL
 
BH5024
Steel / Mill
CRS BUTT HINGE-1.50 OPEN X 1.750 LONG-.035 THK-.091 CDS PIN-COINED-.250 KNUCKLES-MILL-SPRING OPEN
H2232P-02
Plastic / Black
PLASTIC HINGE, 1.61 WIDE X 1.75 LONG, SCREW COVERS, MATTE BLACK, LIGHTLY TEXTURED
 
BH7015ZN
Steel / Zinc Plated
CRS BUTT HINGE-1.46 OPEN x 1.98 LONG-.0512 THK-.1181 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-ZINC PLTD FINISH-BOTH LEAVES SWAGED, BULK
 
6A2530
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 3.000 LONG .064 THK .125 AP SP UNEQ KN -
 
H2078
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 3.00 OPEN X 2.36 LONG, (4) CSUNK HOLES FOR M6 SCREWS, BLACK POWDER COATED FINISH, SS PIN
 
M0999
Stainless Steel / Mill
SS BUTT HINGE-2.03 OPEN x 1.50 LONG-.060 THK-.120 SS PIN-COINED-.375 KNUCKLES-(5) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
H100802
Aluminum / Mill
ALUM BUTT HINGE 5X5 W/ REMOVABLE PIN, WITH ZINC PLATED COTTER PIN
 
6SST1515
316 Stainless Steel / Mill
SS BUTT HINGE 1.50 OPEN x 1.500 LONG .060 THK .125 SSP SK KN - 316 SS
 
6S152002
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 2.000 LONG .060 THK .180 BP SK .500 KN -
 
BH5021SS
Stainless Steel / Mill
SS BUTT HINGE-1.00 OPEN X 2.000 LONG-.040 THK-.091 SS PIN-COINED-.250 KNUCKLES-.142 DIA HOLES-MILL-SPRING OPEN
 
H2080
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 1.57 OPEN X 1.57 LONG, M5 THREADED STUDS, SS PIN, BLACK POWDER COATED
H2280BK
Die Cast Zinc
DIE CAST BUTT HINGE, 2.36 OPEN X 3.54 LONG, 180 DEG ROTATION, 0.31 STEEL NICKEL PLATED KNURLED PIN, M8 THD STUDS, BLACK POWDER COATED
 
12S2025
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 2.500 LONG .120 THK .250 CDS SP UNEQ KN -
 
M0995
Stainless Steel / Mill
SS BUTT HINGE-2.76 OPEN x 2.50 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
12S253003
Steel / Zinc Plated
CRS BUTT HINGE-2.50 OPEN X 3.00 LONG-.120 THK-.250 DIA. CDS PIN-BOTH ENDS SPUN-UNEQUAL KNUCKLES-.262 DIA. HOLES-ZINC PLATED-
H2242N

TAKE-APART HINGE, 50MM LONG X 30MM OPEN, 1.50 THK, C'SUNK HOLES, BRASS, NICKEL PLATED
 
BH5028
Steel / Mill
CRS BUTT HINGE-2.00 OPEN X 5.00 LONG-.047 THK-.118 SS PIN-COINED-.50 KNUCKLES-MILL-SPRING OPEN
H2241SS-01
Stainless Steel
SS BUTT HINGE, 1.57 OPEN X 3.91 LONG, .098 THK, C'SUNK HOLES, SS PIN, (3) BRASS BUSHINGS, BRUSHED FINISH
 
12SS2526
Stainless Steel / Mill
SS BUTT HINGE-2.55 OPEN x 2.55 LONG-.120 THK-.236 SS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
17S4849
Steel / Mill
CRS BUTT HINGE-4.84 OPEN x 4.92 LONG-.177 THK-.393 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL-
 
H2073-04
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 2.36 OPEN X 2.36 LONG, (4) CSUNK HOLES, SS TEFLON COATED PIN, BLACK POWDER COATED
H2219G
Die Cast Zinc / Gray Painted / Gray Painted
HEAVY DUTY STEEL CAST HINGE, .31 THK, 4.72 OPEN X 6.30 LONG, .394 DIA SS PIN, SECURED IN PLACE, PAINTED GREY
 
H2081
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, M6 THREADED STUDS, SS PIN, BLACK POWDER COATED
 
M1008
Stainless Steel / Mill
SS HINGE 1.31 OPEN x 1.500 LONG .060 THK .120 SSP - .375 KN CS EP #8 SCRW
 
12SS6040
Stainless Steel / Mill
SS CONT HINGE-6.00 OPEN X 4.00 LONG-.120 THK-.250 SS PIN-1.00 KNUCKLES-
 
BH5035ZN01
Steel / Zinc Plated
CRS BUTT HINGE-1.00 OPEN X 2.00 LONG-.0394 THK-.090 SS PIN-COINED-.250 KNUCKLES-.145 DIA HOLES-ZINC PLATED-SPRING LOADED OPEN
 
BH5023SS
Stainless Steel / Electropolished
SS BUTT HINGE-1.500 OPEN X 3.500 LONG-.040 THK-.091 SS PIN-COINED-.500 KNUCKLES-ELECTROPOLISHED-SPRING OPEN
 
M0827
Stainless Steel / Mill
MARINE HASP, SS, ELECTROPOLISHED
 
BH5015
Steel / Mill
CRS BUTT HINGE-.75 OPEN X 1.25 LONG-.0250 THK-.066 SS PIN-COINED-.25 KNUCKLES-MILL-SPRING LOADED CLOSED
 
M1004
Stainless Steel / Mill
SS HINGE-2.65 OPEN x 1.500 LONG-.060 THK-.120 SSP-COINED-.375 KNUCKLES-(4) C'SUNK HOLES FOR #8-ELECTROPOISHED-
 
6S2020BP
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 2.000 LONG .060 THK .125 BP SK .500 KN -
 
12SS3040
Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 4.000 LONG .120 THK .250 SSP SP UNEQ KN -
12A252502
Aluminum / Mill
ALUM BUTT HINGE-2.50 OPEN X 2.50 LONG-.118 THK-.250 ALUM PIN-BOTH ENDS SPUN-UNEQUAL KN-.250 HOLES-MILL-
 
BH5035SS01
Stainless Steel / Mill
SS BUTT HINGE-1.00 OPEN X 2.00 LONG-.0394 THK-.090 SS PIN-COINED-.250 KNUCKLES-.145 DIA HOLES-MILL-SPRING LOADED OPEN
 
7S2021
Steel / Mill
CRS BUTT HINGE-2.00 OPEN x 2.000 LONG-.075 THK-.187 CDS-SP-.500 KN----
 
M0627
Stainless Steel / Mill
MARINE STAPLE, 316SS, ELECTROPOLISHED
H2232P-01
Plastic / Black
PLASTIC HINGE, 2.28 WIDE X 2.46 LONG, SCREW COVERS, MATTE BLACK, LIGHTLY TEXTURED
 
12SS2530
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 3.000 LONG .120 THK .250 SSP SP UNEQ KN -
 
BH5034ZN01
Steel / Zinc Plated
CRS BUTT HINGE-1.00 OPEN X 2.00 LONG-.0394 THK-.090 SS PIN-COINED-.250 KNUCKLES-.145 DIA HOLES-ZINC PLATED-SPRING LOADED CLOSED
 
12SS3030
Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 3.000 LONG .120 THK .250 SSP SP UNEQ KN -
 
18S4050
Steel / Mill
CRS BUTT HINGE 4.00 OPEN x 5.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
BH5023ZN01
Steel / Zinc Plated
CRS BUTT HINGE-1.500 OPEN X 3.500 LONG-.040 THK-.091 CDS PIN-COINED-.500 KNUCKLES-.157 DIA HOLES-ZINC PLATED-SPRING OPEN
 
BH5027SS01
Stainless Steel / Electropolished
SS BUTT HINGE-2.00 OPEN X 5.00 LONG-.0472 THK-.118 SS PIN-COINED-.50 KNUCKLES-.193 DIA HOLES-ELECTRO POLISHED-SPRING LOADED CLOSED
 
M1009
Stainless Steel / Mill
SS HINGE 1.31 OPEN x 1.500 LONG .060 THK .120 SSP - .375 KN CS EP #8 SCRW
 
H2081SC-02
Die Cast Zinc
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, (4) C'SINK HOLES, SS PIN, GRAY/SATIN CHROME PLATED
 
M1010
Stainless Steel / Mill
.12 HINGE 4.24 OPEN x 2.125 LONG .060 THK .120 SSP - KN CS EP #8 SCRW
 
BH502001
Stainless Steel / Mill
SS BUTT HINGE-1.06 OPEN x 1.25 LONG-0.035 THK-0.091 SS PIN-COINED-0.25 KN-C'SUNK HOLES-PASSIVATED-SPRING LOADED CLOSED
 
6S152501
Steel / Mill
CRS BUTT HINGE-1.50 OPEN x 2.500 LONG-.060 THK-.125 SSP-SK-.500 KN---OFFSET
 
12SST3040
316 Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 4.000 LONG .120 THK .250 SSP SP KN - 316 SS
 
H3511P-01
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M6 THD, STUDS, BLACK
 
BH5028SS01
Stainless Steel / Mill
SS BUTT HINGE-2.00 OPEN X 5.00 LONG-.047 THK-.118 SS PIN-COINED-.50 KNUCKLES-.193 HOLES-MILL-SPRING OPEN
 
6A2025
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.500 LONG .064 THK .125 AP SP UNEQ KN -
 
13S4040
Steel / Mill
CRS BUTT HINGE-4.00 OPEN x 4.000 LONG-.130 THK-.250 CDS-SP-UNEQ KN--MILL FINISH-
 
12A2525
Aluminum / Mill
ALUM BUTT HINGE-2.50 OPEN x 2.500 LONG-.1181 THK-.250 AP-SP-UNEQUAL KN.--
 
BH7025BP
Steel / Brass Plated
CRS BUTT HINGE-1.84 OPEN x 2.95 LONG-.0591 THK-.1772 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-BRASS PLTD & LACQUERED FINISH-BOTH LEAVES SWAGED, POLYBAGGED
 
BH7005BP
Steel / Brass Plated
CRS BUTT HINGE-0.94 OPEN x 1.00 LONG-.0433 THK-.1024 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-BRASS PLTD & LACQUERED FINISH-BOTH LEAVES SWAGED, POLYBAGGED
 
12S2526
Steel / Mill
CRS BUTT HINGE-2.50 OPEN x 2.55 LONG-.120 THK-.236 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
9SS1919
Stainless Steel / Mill
SS BUTT HINGE-1.97 OPEN x 1.97 LONG-.098 THK-.196 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH-
 
BH7010ZN
Steel / Zinc Plated
CRS BUTT HINGE-1.20 OPEN x 1.50 LONG-.0512 THK-.1083 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-ZINC PLTD FINISH-BOTH LEAVES SWAGED, BULK
 
15SS3939
Stainless Steel / Mill
SS BUTT HINGE-3.94 OPEN x 3.94 LONG-.157 THK-.315 SS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
H3504P
Plastic / Black
PLASTIC BUTT HINGE, 2.72 OPEN X 2.00 LONG, .400 THK, .710 SS PIN, M6 C'BORE HOLES, BLACK
 
25S5050
Steel / Mill
CRS BUTT HINGE 5.00 OPEN x 5.000 LONG .250 THK .625 CDS - UNEQ KN -
 
6SS1515
Stainless Steel / Mill
SS BUTT HINGE 1.50 OPEN x 1.500 LONG .060 THK .125 SSP SK .500 KN -
H2231P
Plastic / Black
PLASTIC DETENT HINGE, 2.24 WIDE X 2.04 LONG, SCREW COVERS, BLACK TEXTURED
 
12SS30401BK
Stainless Steel / Black
SS BUTT HINGE-2.97 OPEN X 3.95 LONG-.11 THK-.315 SS PIN-STAKED-UNEQUAL KNUCKLES-OBROUNDS-BLACK POWDER COATED FINISH-
 
M1012
Stainless Steel / Mill
SS HINGE 4.00 OPEN x 1.060 LONG .060 THK .125 SSP CN UNQL KN CS EP #8 SCRW
 
BH7005ZN
Steel / Zinc Plated
CRS BUTT HINGE-0.94 OPEN x 1.00 LONG-.0433 THK-.1024 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-ZINC PLTD FINISH-BOTH LEAVES SWAGED, BULK
 
7S2025
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 2.500 LONG .074 THK .187 CDS SP UNEQ KN -
 
H3518P
Plastic / Black
PLASTIC BUTT HINGE, 1.69 OPEN X 1.89 LONG, .355 THK, .024 SS PIN, C'SUNK (4) HOLES, UNEQUAL LEAVES, M6 SCREWS, BLACK
 
12SS40402
Stainless Steel / Mill
SS BUTT HINGE 4.00 OPEN x 4.000 LONG .120 THK .275 SSP SP UNQL KN - HALF SWG
BH5089SS-01
Stainless Steel / Mill
SS BUTT HINGE-1.50 OPEN X 2.50 LONG-.060 THK-.120 SS PIN-ONE END COINED-.500 KNUCKLES-.250 HOLES-MILL-
 
H1009
Aluminum / Mill
ALUM BUTT HINGE, 5X5 W/ REMOVABLE STEEL ZINC PLATED PIN, SS WASHERS AND COTTER PIN, RADIUS CORNERS
H3539P
Plastic
PLASTIC ENCLSOURE HINGE, 2.52 OPEN X 2.52 LONG, STEEL ZINC PLATED PIN, 8 KNUCKLES, COUNTERBORE HOLES, BLACK
 
BH5022ZN01
Steel / Zinc Plated
CRS BUTT HINGE-.75 OPEN X 1.25 LONG-.025 THK-.066 SS PIN-COINED-.25 KNUCKLES-.130 DIA HOLES-ZINC PLATED-SPRING LOADED OPEN
 
9A3535
Aluminum / Mill
ALUM BUTT HINGE 3.50 OPEN x 3.500 LONG .091 THK .187 AP SP UNEQ KN -
 
BH0080
Steel / Mill
CRS BUTT HINGE 1.25 OPEN x 1.500 LONG .035 THK .091 CDS SK .250 KN -
 
H2285SS
Stainless Steel
SS BUTT HINGE, .078 THK, 1.38 OPEN X 1.46 LONG, .193 SS PIN, C'SUNK HOLES, BRUSHED
 
M0990
Stainless Steel / Mill
SS BUTT HINGE-1.50 OPEN x 2.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KNUCKLES-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
H3506P-03
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, M3 THD HOLES, M4 THD STUDS, BLACK
 
6A2525
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 2.500 LONG .064 THK .125 AP SP UNEQ KN -
 
9A2535
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 3.500 LONG .091 THK .187 AP SP UNEQ KN -
 
3SS102001
Stainless Steel / Mill
SS BUTT HINGE-1.00 OPEN x 2.00 LONG-.030 THK-.066 SS PIN-STAKED-.500 KNUCKLES--MILL-
 
9S3535
Steel / Mill
CRS BUTT HINGE 3.50 OPEN x 3.500 LONG .090 THK .187 CDS SP UNEQ KN -
H2257BK
Die Cast Zinc
DIE CAST BUTT HINGE, 2.99 OPEN X 1.97 LONG, 180 DEG ROTATION, 0.236 STEEL PIN, 6.30MM X 12.50MM C'SUNK HOLES, BLACK POWDER COATED
 
12A2530
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 3.000 LONG .125 THK .250 AP SP UNEQ KN -
 
BH5033
Steel / Mill
CRS SPRING LOADED BUTT HINGE-1.06 OPEN x 1.250 LONG-.0394 THK-.0910 SS PIN-SPUN ON BOTH ENDS-.250 KN-W/ HOLES-ZINC PLATED FINISH-
 
8A2020
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.000 LONG .081 THK .187 AP SP KN -
 
BH7015BP
Steel / Brass Plated
CRS BUTT HINGE-1.46 OPEN x 1.98 LONG-.0512 THK-.1181 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-BRASS PLTD & LACQUERED FINISH-BOTH LEAVES SWAGED, POLYBAGGED
 
BH0050
Steel / Mill
CRS BUTT HINGE .750 OPEN x .750 LONG .035 THK .099 CDS SK .250 KN -
 
9SS2030
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 3.000 LONG .090 THK .187 SSP SP UNEQ KN -
 
9A2530
Aluminum / Mill
ALUM BUTT HINGE 2.50 OPEN x 3.000 LONG .091 THK .187 AP SP UNEQ KN -
 
10SS2525
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 2.500 LONG .105 THK .187 SSP SP UNEQ KN -
 
6S1515BP
Steel / Mill
CRS BUTT HINGE-1.50 OPEN x 1.500 LONG-.060 THK-.125 BP-SK-.500 KNUCKLES-
 
18S5080
Steel / Mill
CRS BUTT HINGE 5.00 OPEN x 8.000 LONG .180 THK .375 CDS SP UNEQ KN
 
H2081-02
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, (4) CSUNK HOLES, SS PIN, BLACK POWDER COATED
 
8S3535
Steel / Mill
CRS BUTT HINGE 3.50 OPEN x 3.500 LONG .085 THK .195 CDS SK .500 KN -
 
7SS2525
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 2.500 LONG .075 THK .187 SSP SP UNEQ KN -
 
25S4050
Steel / Mill
CRS BUTT HINGE 4.00 OPEN x 5.000 LONG .250 THK .625 CDS - UNEQ KN -
 
BH5023SS01
Stainless Steel / Electropolished
SS BUTT HINGE-1.50 OPEN X 3.500 LONG-.040 THK-.091 SS PIN-COINED-.500 KNUCKLES-.157 DIA HOLES-ELECTROPOLISHED-SPRING OPEN
 
5S151501
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 1.500 LONG .047 THK .120 SSP SP .300 KN -
 
H3514P
Plastic / Black
PLASTIC BUTT HINGE, 2.95 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, UNEQUAL LEAVES, C'SUNK (2) HOLES, M6 SCREWS, BLACK
H2245N

TAKE-APART HINGE, 36MM LONG X 30MM OPEN, 1.50 THK, C'SUNK HOLES, BRASS, NICKEL PLATED
 
BH5025SS
Steel / Electropolished
SS BUTT HINGE-1.50 OPEN X 3.50 LONG-.0394 THK-.090 SS PIN-COINED-.50 KNUCKLES-ELECTRO POLISHED-SPRING LOADED CLOSED
 
BH5031SS
Stainless Steel / Mill
SS BUTT HINGE 1.50 OPEN x 2.000 LONG .035 THK .091 SSP CN .25 KN RD - SPRG OPN
H2219BK
Die Cast Zinc / Black
HEAVY DUTY STEEL CAST HINGE, .31 THK, 4.72 OPEN X 6.30 LONG, .394 DIA SS PIN, SECURED IN PLACE, PAINTED BLACK
 
BH7010BP
Steel / Brass Plated
CRS BUTT HINGE-1.20 OPEN x 1.50 LONG-.0512 THK-.1083 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-BRASS PLTD & LACQUERED FINISH-BOTH LEAVES SWAGED, POLYBAGGED
 
H2269BK-01
Die Cast Zinc
DIE CAST BUTT HINGE, 4.72 OPEN X 2.36 LONG, .315" DIA STEEL PIN, M8 THD STUDS, HOLES, BLACK POWDER COATED
 
19S5959
Steel / Mill
CRS BUTT HINGE-5.91 OPEN x 5.91 LONG-.197 THK-.433 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
H2073SS-04

STAINLESS STEEL HINGE, 2.36 OPEN X 2.36 LONG, (4) CSUNK HOLES, SS TEFLON COATED PIN, BRUSHED
 
12S2829
Steel / Mill
CRS BUTT HINGE-2.87 OPEN x 2.95 LONG-.126 THK-.267 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
6A3030
Aluminum / Mill
ALUM BUTT HINGE 3.00 OPEN x 3.000 LONG .064 THK .125 AP SP UNEQ KN -
H2080SS-02
Stainless Steel
SS HINGE, 1.57 OPEN X 1.57 LONG, (4) C'SUNK HOLES, SS PIN, BRUSHED
 
6S152001
Steel / Zinc Plated
CRS BUTT HINGE 1.50 OPEN x 2.000 LONG .060 THK, .180 DIA BRASS PIN, STAKED, .500 KNUCKLE, .2031 HOLES, ZINC PLATED
 
18S4060
Steel / Mill
CRS BUTT HINGE 4.00 OPEN x 6.000 LONG .180 THK .375 CDS SP UNEQ KN -
H2073SS-03

STAINLESS STEEL HINGE, 2.00 OPEN X 2.00 LONG, 4) CSUNK HOLES, SS PIN, BRUSHED
 
12S3535
Steel / Mill
CRS BUTT HINGE-3.50 OPEN X 3.50 LONG-.118 THK-.250 CDS PIN-SPUN BOTH ENDS-UNEQUAL KN-MILL-
 
7S2020
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 2.000 LONG .074 THK .187 CDS SP UNEQ KN -
 
6A1015
Aluminum / Mill
ALUM BUTT HINGE 1.00 OPEN x 1.500 LONG .064 THK .125 AP SP UNEQ KN -
 
H3512P
Plastic / Black
PLASTIC BUTT HINGE, 2.34 OPEN X 1.57 LONG, .325 THK, .004 SS PIN, C'SUNK (2) HOLES, M6 SCREWS, BLACK
 
BH5090
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 3.000 LONG .060 THK .125 SSP CD .500 KN - SPRG OPN
 
6S1525BP
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 2.500 LONG .060 THK .125 BP SK .500 KN -
 
H3511P
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M5 THD, HOLES, BLACK
 
12SST3030
316 Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 3.000 LONG .120 THK .250 SSP SP KN - 316 SS
 
BH0070
Steel / Mill
CRS BUTT HINGE 1.06 OPEN x 1.500 LONG .035 THK .091 CDS SK .250 KN -
 
12A3540
Aluminum / Mill
ALUM BUTT HINGE 3.50 OPEN x 4.000 LONG .125 THK .250 AP SP UNEQ KN -
 
10S2525
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 2.500 LONG .105 THK .187 CDS SP UNEQ KN -
 
18S4040
Steel / Mill
CRS BUTT HINGE-4.00 OPEN x 4.000 LONG-.180 THK-.375 SS-SP-UNEQ KN----
 
9S3030
Steel / Mill
CRS BUTT HINGE-3.00 OPEN x 3.000 LONG-.090 THK-.187 CDS-SP-.500 KNUCKLES-MILL-
 
H2081SC
Die Cast Zinc
DIE CAST ZINC HINGE, 1.57 OPEN X 2.11 LONG, M6 THREADED STUDS, SS PIN, GRAY/SATIN CHROME PLATED
 
9SS3035
Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 3.500 LONG .090 THK .187 SSP SP UNEQ KN -
 
6SST2525
316 Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 2.500 LONG .060 THK .125 SS SK KN - 316 SS
 
12A3040
Aluminum / Mill
ALUM BUTT HINGE 3.00 OPEN x 4.000 LONG .125 THK .250 AP SP UNEQ KN -
 
7S3030
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 3.000 LONG .074 THK .187 CDS SP UNEQ KN -
 
BH5025
Steel / Mill
CRS BUTT HINGE-1.50 OPEN X 3.50 LONG-.040 THK-.090 PIN-COINED-.50 KNUCKLES-MILL-SPRING LOADED CLOSED
 
6SS2030
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 3.000 LONG .062 THK .125 SSP SP UNEQ KN -
 
BH5027ZN01
Steel / Zinc Plated
CRS BUTT HINGE-2.00 OPEN X 5.00 LONG-.0472 THK-.118 SS PIN-COINED-.50 KNUCKLES-.193 DIA HOLES-ZINC PLATED-SPRING LOADED CLOSED
 
6SS2525
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 2.500 LONG .060 THK .125 SSP SP UNEQ KN -
 
H2284WTP
Plastic
PLASTIC BUTT HINGE, 1.59 OPEN X 1.42 LONG, C'SUNK HOLES, SS ZINC PLATED PIN, WHITE
H2256BK
Die Cast Zinc
DIE CAST BUTT HINGE, 1.57 OPEN X .94 LONG, 180 DEG ROTATION, 0.16 STEEL NICKEL PLATED KNURLED PIN, M5 THD STUDS, BLACK POWDER COATED
H2072-01
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 3.54 OPEN X 2.36 LONG, UNEQUAL LEAVES, C'SUNK HOLES, BLACK POWDER COAT
 
9SST2030
316 Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 3.000 LONG .090 THK .187 SSP SP KN - 316 SS
 
12S2525
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 2.500 LONG .120 THK .250 CDS SP UNEQ KN -
 
7SS2021
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.000 LONG .075 THK .187 SSP SP KN -
 
H3500P
Plastic / Black
PLASTIC BUTT HINGE, .984 OPEN x .984 LONG, .12 THK, .118 SS PIN, (4) C'SUNK HOLES FOR M3 SCREWS, BLACK
 
7S2030
Steel / Mill
CRS BUTT HINGE-2.00 OPEN x 3.000 LONG-.074 THK-.187 CDS-BOTH ENDS SPUN-UNEQ KN----
 
25S4040SSP
Steel / Mill
CRS BUTT HINGE-4.00 OPEN X 4.000 LONG-.250 THK-.625 FLUSH SS PIN-UNEQUAL KNUCKLES-MILL FINISH-
 
H3511P-05
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M6 THD, INSERTS BLIND MOUNTING, BLACK
 
M0996
Stainless Steel / Mill
SS BUTT HINGE-1.25 OPEN x 1.50 LONG-.035 THK-.086 SS PIN-STAKED-.25 KN-(4) C'SUNK HOLES FOR #5-ELECTROPOLISHED-
 
H2080-02
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 1.57 OPEN X 1.57 LONG, (4) CSUNK HOLES, SS PIN, BLACK POWDER COATED
 
BH7030
Steel / Zinc Plated
CRS BUTT HINGE-2.00 OPEN X 3.00 LONG-.0710 THK-.187 CDS PIN-BOTH ENDS SPUN-.500 KNUCKLE-.281 CSUNK HOLES-BLUE ZINC PLATED-
 
BH5024SS01
Stainless Steel / Mill
SS BUTT HINGE-1.50 OPEN X 1.75 OPEN-.035 THK-.091 SS PIN-COINED-.250 KNUCKLES-.157 DIA HOLES-MILL-SPRING LOADED OPEN
 
M0993
Stainless Steel / Mill
SS HINGE-2.00 OPEN x 3.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(6) C'SUNK FOR #8-ELECTROPOLISHED-
H2244N

TAKE-APART HINGE, 36MM LONG X 32MM OPEN, 1.50 THK, 3.500MM DIA HOLES, BRASS, NICKEL PLATED
H2216
Die Cast Zinc / Black
DIE CAST CONCEALED ENCLOSURE HINGE, 1.65 OPEN X 2.76 LONG, M5 MOUNTING STUDS ONE LEAF, .209 HOLES OTHER LEAF, BLACK POWDER COATED
 
BH5027
Steel / Mill
CRS BUTT HINGE-2.00 OPEN X 5.00 LONG-.047 THK-.118 SS PIN-COINED-.50 KNUCKLES-MILL-SPRING LOADED CLOSED
 
BH5020
Steel / Mill
CRS BUTT HINGE-1.06 OPEN x 1.25 LONG-0.035 THK-0.091 SS PIN-COINED-0.25 KN-C'SUNK HOLES-ZINC PLATED-SPRING LOADED CLOSED
 
H2073-01
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 2.36 OPEN X 2.36 LONG, M8 THD, 304SS PIN, MATTE BLACK EPOXY POWDER COATED
 
9S2030
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 3.000 LONG .090 THK .187 CDS SP UNEQ KN -
 
BH0005
Steel / Mill
CRS BUTT HINGE .750 OPEN x 1.000 LONG .020 THK .072 CDS SK .250 KN -
 
12S3035
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 3.500 LONG .120 THK .250 CDS SP UNEQ KN -
 
H3501P
Plastic / Black
PLASTIC BUTT HINGE, 1.18 OPEN x .984 LONG, .12THK, .118 SS PIN, (4) C'SUNK HOLES FOR M4 SCREWS, BLACK
 
12SST2030
316 Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 3.000 LONG .120 THK .250 SSP SP KN - 316 SS
 
BH5024SS
Stainless Steel / Mill
SS BUTT HINGE-1.50 OPEN X 1.750 LONG-035 THK-.091 SS PIN-COINED-.250 KNUCKLES-MILL-SPRING OPEN
 
6SST1520
316 Stainless Steel / Mill
SS BUTT HINGE 1.50 OPEN x 2.000 LONG .060 THK .125 SS SK KN - 316 SS
 
BH5028ZN01
Steel / Zinc Plated
CRS BUTT HINGE-2.00 OPEN X 5.00 LONG-.047 THK-.118 SS PIN-COINED-.50 KNUCKLES-.193 HOLES-ZINC PLATED-SPRING OPEN
 
M1005
Stainless Steel / Mill
SS HINGE 2.03 OPEN x 1.500 LONG .060 THK .125 SS - UNQL KN CS EP #8 SCRW5
 
6SS2020
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.00 LONG .060 THK .125 SSP SK .500 KN -
 
12SS3535
Stainless Steel / Mill
SS BUTT HINGE-3.50 OPEN X 3.50 LONG-.118 THK-.250 SS PIN-SPUN BOTH ENDS-UNEQUAL KN-MILL-
 
12S2535
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 3.500 LONG .120 THK .250 CDS SP UNEQ KN -
 
8S3030
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 3.000 LONG .085 THK .195 CDS SK .500 KN -
 
8S2525SP
Steel / Mill
CRS BUTT HINGE-2.50 OPEN x 2.500 LONG-.085 THK-.195 CDS-SP-.500 KN---OPP STK
 
8S2525
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 2.500 LONG .085 THK .195 CDS SK .500 KN -
 
BH5025SS01
Steel / Electropolished
SS BUTT HINGE-1.50 OPEN X 3.50 LONG-.0394 THK-.090 SS PIN-COINED-.50 KNUCKLES-.157 DIA HOLES-ELECTRO POLISHED-SPRING LOADED CLOSED
 
7SST2020
316 Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.000 LONG .075 THK .187 SSP SP KN - 316 SS
 
12A2030
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 3.000 LONG .125 THK .250 AP SP UNEQ KN -
 
H2073-03
Die Cast Zinc / Black
DIE CAST ZINC HINGE, 2.00 OPEN X 2.00 LONG, (4) CSUNK HOLES, SS PIN, BLACK POWDER COATED
 
BH5028SS
Stainless Steel / Electropolished
SS BUTT HINGE-2.00 OPEN X 5.000 LONG-.0472 THK-.1181 SS PIN-COINED-.500 KNUCKLES-ELECTROPOLISHED-SPRING OPEN
 
BH5085
Steel / Zinc Plated
CRS BUTT HINGE-2.75 OPEN x 1.562 LONG-.050 THK-.115 CDS-CN-.312 KN-RD-ZINC PLATED-SPRG OPN
 
M1000
Stainless Steel / Mill
SS HINGE-4.00 OPEN x 1.500 LONG-.060 THK-.120 SSP-COINED-.375 KNUCKLES-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
H2095
Die Cast Zinc
DIE CAST ZINC HINGE, 1.97 OPEN X 2.99 LONG, (4) C'SUNK HOLES, BLACK POWDER COATED
 
8S4040
Steel / Mill
CRS BUTT HINGE 4.00 OPEN x 4.000 LONG .085 THK .195 CDS SK .500 KN -
 
M0998
Stainless Steel / Mill
SS BUTT HINGE-2.75 OPEN x 1.50 LONG-.060 THK-.120 SS PIN-COINED-.375 KNUCKLES-(6) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
6S2025BP
Steel / Mill
CRS BUTT HINGE 2.00 OPEN x 2.500 LONG .060 THK .125 BP SK .500 KN -
 
H3506P
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, M3 THD, HOLES, BLACK
 
12S2530
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 3.000 LONG .120 THK .250 CDS SP UNEQ KN -
H2243N

TAKE-APART HINGE, 36MM LONG X 30MM OPEN, 1.50 THK, 3.200MM DIA HOLES, BRASS, NICKEL PLATED
H2275BK
Die Cast Zinc
DIE CAST BUTT HINGE, 2.92" OPEN X 1.96" LONG, .236 THK, (4) M6 THREADED STUDS, BLACK POWDER COATED FINISH, NICKEL PLATED PIN
 
18S6060
Steel / Mill
HRPO BUTT HINGE 6.00 OPEN x 6.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
BH5027SS
Stainless Steel / Electropolished
SS BUTT HINGE-2.00 OPEN X 5.00 LONG-.0472 THK-.118 SS PIN-COINED-.50 KNUCKLES-ELECTRO POLISHED-SPRING LOADED CLOSED
 
BH5021
Steel / Mill
CRS BUTT HINGE-1.00 OPEN X 2.000 LONG-.040 THK-.091 CDS PIN-COINED-.250 KNUCKLES-.142 DIA HOLES-ZINC PLATED-SPRING OPEN
 
12S3540
Steel / Mill
CRS BUTT HINGE 3.50 OPEN x 4.000 LONG .120 THK .250 CDS SP UNEQ KN -
 
H3506P-05
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, M4 THD, INSERTS, BLACK
 
6A1515
Aluminum / Mill
ALUM BUTT HINGE 1.50 OPEN x 1.500 LONG .064 THK .125 AP SP UNEQ KN -
 
13S3435
Steel / Mill
CRS BUTT HINGE-3.47 OPEN x 3.54 LONG-.137 THK-.275 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
 
9A2030
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 3.000 LONG .091 THK .187 AP SP UNEQ KN -
 
M0991
Stainless Steel / Mill
SS BUTT HINGE-1.75 OPEN x 2.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(4) C'SUNK HOLES FOR #8-ELECTROPOLISHED-
 
9SS3535
Stainless Steel / Mill
SS BUTT HINGE 3.50 OPEN x 3.500 LONG .090 THK .187 SSP SP UNEQ KN -
 
6A2030
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 3.000 LONG .064 THK .125 AP SP UNEQ KN -
 
BH0004
Brass / Lacquered
BRASS BUTT HINGE-.75 OPEN X 1.00 LONG-.030 THK-.063 BRASS PIN-.20 KNUCKLES-.141 DIA HOLES-LACQUERED-
 
12SS2030
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 3.000 LONG .120 THK .250 SSP SP UNEQ KN -
 
M1002
Stainless Steel / Mill
SS HINGE 2.50 OPEN x 2.000 LONG .060 THK .120 SSP SK .500 KN CS EP #8 SCRW
 
BH5023
Steel / Mill
CRS BUTT HINGE-1.50 OPEN X 3.500 LONG-.040 THK-.091 CDS PIN-COINED-.500 KNUCKLES-MILL-SPRING OPEN
 
12A4040
Aluminum / Mill
ALUM BUTT HINGE 4.00 OPEN x 4.000 LONG .125 THK .250 AP SP UNEQ KN -
H2281SS
Stainless Steel
CAST SS BUTT HINGE, .315 THK, 2.66 OPEN X 3.15 LONG, 0.315 DIA SS PIN, C'SUNK HOLES, ELECTROPOLISHED
 
9SS3030
Stainless Steel / Mill
SS BUTT HINGE-3.00 OPEN x 3.000 LONG-.090 THK-.187 SSP-SP-.500 KNUCKLES-MILL-
 
12A2025
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.500 LONG .125 THK .250 AP SP UNEQ KN -
 
12S303001
Steel / Zinc Plated
CRS BUTT HINGE-3.00 OPEN x 3.000 LONG-.120 THK-.250 BP-SP-UNQL KN-ZINC PLATED-SWAGED
H2241SS-02
Stainless Steel
SS BUTT HINGE, 1.57 OPEN X 3.14 LONG, .098 THK, C'SUNK HOLES, SS PIN, (3) BRASS BUSHINGS, BRUSHED FINISH
 
12S6060
Steel / Mill
CRS BUTT HINGE-6.00 OPEN X 6.00 LONG-.120 THK-.250 CDS PIN-SPUN BOTH ENDS-EVEN KNUCKLES-MILL-
 
H1100WT
Plastic
PLASTIC HINGE, WHITE, SS PIN, WITH SCREW CAPS
 
BH7020ZN
Steel / Zinc Plated
CRS BUTT HINGE-1.60 OPEN x 2.50 LONG-.0512 THK-.1260 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-ZINC PLTD FINISH-BOTH LEAVES SWAGED, BULK
 
BH7025ZN
Steel / Zinc Plated
CRS BUTT HINGE-1.84 OPEN x 2.95 LONG-.0591 THK-.1772 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-ZINC PLTD FINISH-BOTH LEAVES SWAGED, BULK
 
5A2025
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.500 LONG .051 THK .125 AP SP UNEQ KN -
 
H3503P
Plastic / Black
PLASTIC BUTT HINGE, 1.97 OPEN X 1.97 LONG, .24 THK, 0.236 SS PIN, (4) C'SUNK HOLES FOR M6 SCREWS, BLACK
 
H3511P-03
Plastic / Black
PLASTIC ENCLOSURE HINGE, SS PIN, 8 KNUCKLES, M5 THD HOLES AND M6 THD STUDS, BLACK
 
7SS2025
Stainless Steel / Mill
SS BUTT HINGE 2.00 OPEN x 2.500 LONG .075 THK .187 SSP SP UNEQ KN -
 
6S1520
Steel / Mill
CRS BUTT HINGE 1.50 OPEN x 2.000 LONG .067 THK .125 CDS - MILL
 
M1067
Stainless Steel / Mill
SS TAKE APART HINGE W/ C-CLIP-3.00 OPEN x 2.000 LONG-.090 THK-.250 SSP-1.00 KN-CS-ELECTROPOLISHED-ONE LEAF SWAGED
 
12S3040
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 4.000 LONG .120 THK .250 CDS SP UNEQ KN -
 
BH5022
Steel / Mill
CRS BUTT HINGE-.75 OPEN X 1.250 LONG-.025 THK-.066 CDS PIN-COINED-.250 KNUCKLES-MILL-SPRING OPEN
 
12A3030
Aluminum / Mill
ALUM BUTT HINGE 3.00 OPEN x 3.000 LONG .125 THK .250 AP SP UNEQ KN -
 
18S6080
Steel / Mill
CRS BUTT HINGE 6.00 OPEN x 8.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
6SS2530
Stainless Steel / Mill
SS BUTT HINGE 2.50 OPEN x 3.000 LONG .062 THK .125 SSP SP UNEQ KN -
 
9SST3030
316 Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 3.000 LONG .090 THK .187 SSP SP KN - 316 SS
 
18S5050
Steel / Mill
CRS BUTT HINGE 5.00 OPEN x 5.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
8A2025
Aluminum / Mill
ALUM BUTT HINGE 2.00 OPEN x 2.500 LONG .081 THK .187 AP SP UNEQ KN -
 
12SS4040
Stainless Steel / Mill
SS BUTT HINGE-4.00 OPEN x 4.000 LONG-.120 THK-.275 SSP-SP-UNEQ KN----
 
9SS303002
Stainless Steel / Mill
SS BUTT HINGE 3.00 OPEN x 3.000 LONG .090 THK .187 SSP SP .500 KN RD - HF SWAG2
 
H1008
Aluminum / Mill
ALUM BUTT HINGE 5X5 W/ REMOVABLE PIN
H2095SS
Stainless Steel
STAINLES STEEL HINGE, 1.97 OPEN X 2.99 LONG, (4) C'SUNK HOLES, BRUSHED
H2282BK
Die Cast Zinc
DIE CAST BUTT HINGE, 2.99 OPEN X 1.97 LONG, 180 DEG ROTATION, 0.236 STEEL PIN, M6 THD STUDS, BLACK POWDER COATED
 
9S2530
Steel / Mill
CRS BUTT HINGE 2.50 OPEN x 3.000 LONG .090 THK .187 CDS SP UNEQ KN -
 
BH7020BP
Steel / Brass Plated
CRS BUTT HINGE-1.60 OPEN x 2.50 LONG-.0512 THK-.1260 CDS PIN-SPUN-UNEQUAL KN-W/ HOLES-BRASS PLTD & LACQUERED FINISH-BOTH LEAVES SWAGED, POLYBAGGED
 
18S4040SSP
Steel / Mill
CRS BUTT HINGE-4.00 OPEN x 4.00 LONG-.177 THK-.375 SS PIN-SPUN EACH END-UNEQUAL KNUCKLES-NO HOLES-MILL FINISH
 
M0994
Stainless Steel / Mill
SS HINGE-3.00 OPEN x 3.00 LONG-.060 THK-.120 SS PIN-STAKED-.50 KN-(6) C'SUNK HOLES FOR #10-ELECTROPOLISHED-
 
18S3060
Steel / Mill
CRS BUTT HINGE 3.00 OPEN x 6.000 LONG .180 THK .375 CDS SP UNEQ KN -
 
6SS2025
Stainless Steel / Mill
SS BUTT HINGE-2.00 OPEN x 2.500 LONG-.060 THK-.125 SS PIN-STAKED-.50" KNUCKLES-
 
BH0075
Steel / Mill
CRS BUTT HINGE 1.06 OPEN x 2.000 LONG .035 THK .091 CDS SK .250 KN -
 
12SS3540
Stainless Steel / Mill
SS BUTT HINGE 3.50 OPEN x 4.000 LONG .120 THK .250 SSP SP UNEQ KN -
Google Analytics Alternative